What are NURBS?

NURBS, Non-Uniform Rational B-Splines, are mathematical representations of 3D geometry that can accurately describe any shape from a simple 2D line, circle, arc, or curve to the most complex 3D organic free-form surface or solid. Because of their flexibility and accuracy, NURBS models can be used in any process, from illustration and animation to manufacturing.

NURBS geometry has five important qualities that make it an ideal choice for computer-aided modeling.

• Several industry‑standard methods are used to exchange NURBS geometry. Consequently, customers can move their valuable geometric models between the various modeling, rendering, animation, and engineering analysis programs.
• NURBS have a precise and well-known definition. Most major universities teach mathematics and computer science of NURBS geometry. This means that specialty software vendors, engineering teams, industrial design firms, and animation houses that need to create custom software applications can find trained programmers who are able to work with NURBS geometry.
• NURBS can accurately represent both standard geometric objects like lines, circles, ellipses, spheres, tori, and free‑form geometry like car bodies and human bodies.
• The amount of information required for a NURBS representation of a piece of geometry is much smaller than the amount of information required by common faceted approximations.
• The NURBS evaluation rule, discussed below, can be implemented on a computer both efficiently and accurately.

## What is NURBS Geometry?

NURBS curves and surfaces behave in similar ways and share terminology. Since curves are the easiest to describe, we will cover them in detail. Four things define a NURBS curve: degree, control points, knots, and an evaluation rule.

### Degree

The degree is a positive whole number.

This number is usually 1, 2, 3, or 5, but can be any positive whole number. NURBS lines and polylines are usually degree 1, NURBS circles are degree 2, and most free‑form curves are degree 3 or 5. Sometimes the terms linear, quadratic, cubic, and quintic are used. Linear means degree 1, quadratic means degree 2, cubic means degree 3, and quintic means degree 5.

You may see references to the order of a NURBS curve. The order of a NURBS curve is a positive whole number equal to (degree+1). Consequently, the degree is equal to (order‑1).

It is possible to increase the degree of a NURBS curve and not change its shape. Generally, it is not possible to reduce a NURBS curve’s degree without changing its shape.

### Control Points

The control points are a list of at least degree+1 points.

One of the easiest ways to change the shape of a NURBS curve is to move its control points.

The control points have an associated number called a weight. With a few exceptions, weights are positive numbers. When a curve’s control points all have the same weight (usually 1), the curve is called non-rational. Otherwise, the curve is called rational. The R in NURBS stands for rational and indicates that a NURBS curve has the possibility of being rational. In practice, most NURBS curves are non-rational. A few NURBS curves, circles, and ellipses being notable examples, are always rational.

### Knots

The knots are a list of (degree+N-1) numbers, where N is the number of control points. Sometimes this list of numbers is called the knot vector. In this term, the word vector does not mean 3D direction.

This list of knot numbers must satisfy several technical conditions. The standard way to ensure that the technical conditions are satisfied is to require the numbers to stay the same or get larger as you go down the list and to limit the number of duplicate values to no more than the degree. For example, for a degree 3 NURBS curve with 11 control points, the list of numbers 0,0,0,1,2,2,2,3,7,7,9,9,9 is a satisfactory list of knots. The list 0,0,0,1,2,2,2,2,7,7,9,9,9 is unacceptable because there are four 2s and four is larger than the degree.

The number of times a knot value is duplicated is called the knot’s multiplicity. In the previous example of a satisfactory list of knots, the knot value 0 has multiplicity three, the knot value 1 has multiplicity one, the knot value 2 has multiplicity three, the knot value 3 has multiplicity one, the knot value 7 has multiplicity two, and the knot value 9 has multiplicity three. A knot value is a full-multiplicity knot if it is duplicated degree many times. In the example, the knot values 0, 2, and 9 have full multiplicity. A knot value that appears only once is called a simple knot. In the example, the knot values 1 and 3 are simple knots.

If a list of knots starts with a full multiplicity knot, is followed by simple knots, terminates with a full multiplicity knot, and the values are equally spaced, then the knots are called uniform. For example, if a degree 3 NURBS curve with 7 control points has knots 0,0,0,1,2,3,4,4,4, then the curve has uniform knots. The knots 0,0,0,1,2,5,6,6,6 are not uniform. Knots that are not uniform are called non‑uniform. The N and U in NURBS stand for non‑uniform and indicate that the knots in a NURBS curve are permitted to be non-uniform.

Duplicate knot values in the middle of the knot list make a NURBS curve less smooth. At the extreme, a full multiplicity knot in the middle of the knot list means a place on the NURBS curve can be bent into a sharp kink. For this reason, some designers like to add and remove knots and then adjust control points to make curves have smoother or kinkier shapes. Since the number of knots is equal to (N+degree‑1), where N is the number of control points, adding knots also adds control points and removing knots removes control points. Knots can be added without changing the shape of a NURBS curve. In general, removing knots will change the curve shape.

### Knots and Control Points

A common misconception is that each knot is paired with a control point, but this is true only for degree 1 NURBS (polylines). For higher degree NURBS, there are groups of 2 x degree knots that correspond to groups of (degree+1) control points. For example, we have a degree 3 NURBS with 7 control points and knots 0,0,0,1,2,5,8,8,8. The first four control points are grouped with the first six knots. The second through fifth control points are grouped with the knots 0,0,1,2,5,8. The third through sixth control points are grouped with the knots 0,1,2,5,8,8. The last four control points are grouped with the last six knots.

Some modelers that use older algorithms for NURBS evaluation require two extra knot values for a total of (degree+N+1) knots. When Rhino is exporting and importing NURBS geometry, it automatically adds and removes these two superfluous knots as the situation requires.

### Evaluation Rule

A curve evaluation rule is a mathematical formula that takes a number and assigns a point.

The NURBS evaluation rule is a formula that involves the degree, control points, and knots. In the formula there are some things called B-spline basis functions. The B and S in NURBS stand for basis spline. The number the evaluation rule starts with is called a parameter. You can think of the evaluation rule as a black box that eats a parameter and produces a point location. The degree, knots, and control points determine how the black box works.

If you are comfortable reading mathematical formulae, please see ikipedia: Non uniform rational b spline.